We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Wind tunnel testing equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Wind tunnel testing equipment - List of Manufacturers, Suppliers, Companies and Products

Wind tunnel testing equipment Product List

1～6 item / All 6 items

Displayed results
Supersonic wind tunnel experimental apparatus

Supersonic wind tunnel experimental apparatus

Supersonic wind tunnel experimental device

Compressed air is rapidly blown from an optional (sold separately) large-capacity compressor and tank into the downstream of the experimental area. The air that passes through the settling chamber and converging chamber provides a stable flow at subsonic, Mach 1.4, and Mach 1.8 to the experimental area. The air that has passed through the experimental area mixes again with the blown air and recirculates. Excess air is discharged from the exhaust filter. The experimental area, measuring 100mm x 25mm, comes with three types of interchangeable liners for subsonic, Mach 1.4, and Mach 1.8. The included model is mounted in the center of the observation window, and experiments are conducted while changing the angle. The pressure at 25 points in the experimental area is displayed in real-time digitally in four groups, and two Bourdon tube pressure gauges show the pressure from the compressor (sold separately) and the supply pressure to the wind tunnel. *The operating time (approximately 10 to 20 seconds) varies depending on the capacity of the compressed air tank, etc.

  • Vocational Training/Technical School

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop wind tunnel experimental device

Tabletop wind tunnel experimental device

Tabletop wind tunnel experimental device

This open-type suction wind tunnel allows for a wide range of experiments related to fluid dynamics, despite its compact design. It consists of a large bell mouth with a honeycomb, a two-dimensional converging nozzle, an experimental area (125x125mm), a diffusion section, a protective mesh, a variable-speed fan, and a silencer unit, achieving a flow with minimal turbulence. The included manometers (6 units) and two Pitot tubes positioned before and after the experimental area measure the wind speed and pressure distribution in the wake of the model. The experimental area has four sides made of transparent acrylic panels, with the front and back panels being removable. The device comes with a single force balance measurement system and three types of experimental models (a cylindrical model with pressure holes, a NACA0012 wing model, and a flat plate model), allowing for immediate experiments on drag or lift, as well as pressure distribution experiments around a cylinder. The drag or lift (N) is digitally displayed on the included display unit. Additionally, the single force balance measurement system can be mounted on the underside of the experimental area, enabling the measurement of drag (N) using original test specimens created with a 3D printer or similar methods.

  • Vocational Training/Technical School

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small wind tunnel experimental device 305

Small wind tunnel experimental device 305

Small wind tunnel experimental device 305

This open-type suction wind tunnel can conduct a wide range of experiments related to fluid dynamics while maintaining a compact design. It consists of a large bell mouth, a two-dimensional converging nozzle, an experimental area (305x305x600mm), a diffusion section, a protective mesh, an axial fan, and a silencer unit, achieving a flow with minimal turbulence. The control unit (desktop type) regulates the rotational speed of the axial fan and controls the flow velocity in the experimental area. The wind tunnel and control unit, mounted on a caster-equipped frame, are designed to be very compact, making it easy to change their arrangement. Various options can be added according to the experimental objectives. The optional data automatic collection system VDAS (sold separately) can display measurement data in real-time on a computer (sold separately) and can calculate and graph the collected data, facilitating smooth progress in experiments.

  • Vocational Training/Technical School

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Smoke wind tunnel experimental device

Smoke wind tunnel experimental device

Smoke wind tunnel experimental device

This is a specially designed small wind tunnel to visualize the airflow around a model. The compact device can be demonstrated in various locations, such as classrooms, regardless of the laboratory setting, and can be easily moved and stored when not in use. The airflow moves from the bottom to the top. Air entering from the bottom of the device passes through a contraction section and a comb-shaped nozzle, then enters observation ducts illuminated on both sides. The lighting clarifies the streamlines around the model. There is a variable-speed fan at the duct exit that adjusts the flow rate based on volume. A smoke generator is located beneath the device. Smoke (oil droplets) is produced by heated vegetable oil and carbon dioxide supplied from a tank, and is sent to the comb-shaped nozzle. From the comb-shaped nozzle, 23 streamlines are released to observe the airflow around the model.

  • Vocational Training/Technical School

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flight demonstration wind tunnel testing device

Flight demonstration wind tunnel testing device

Flight demonstration wind tunnel experimental device

This is a device specially designed to conduct extensive experiments on the takeoff, flight, and landing of aircraft. The aircraft model in the suction-type open wind tunnel consists of two propellers, a main wing with a chord length of 152mm (NACA2412), and a fully movable tail with a chord length of 76mm. Air flowing in from the bell mouth is discharged from the device through a rectifying honeycomb, the experimental area equipped with the aircraft, a diffusion body, an axial fan, and a silencer duct. The control wheel located at the front of the experimental area manipulates the tail angle of the aircraft model, while the lever resembling the engine throttle on the right side controls the wind speed within the wind tunnel.

  • Vocational Training/Technical School

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid experiment wind tunnel system

Fluid experiment wind tunnel system

Movement across the entire measurement body is possible! We design and manufacture according to your needs, including the use of various visualization devices.

The "Wind Tunnel System for Fluid Experiments" is a wind tunnel designed for experiments in low wind speed to low speed ranges. By combining a measurement cylinder with a 3D traverse device that allows sensor movement throughout its entire area, highly reproducible fluid experiments can be conducted. We design and manufacture user-friendly measurement cylinders, such as those with transparent walls, tailored to your needs, so please feel free to contact us. 【Features】 ■ Achieves a uniform flow with low turbulence even in low wind speed ranges ■ Designs and manufactures user-friendly measurement cylinders according to your applications ■ The 3D traverse device is mounted on the top of the measurement cylinder, allowing movement throughout the entire area of the measurement cylinder * For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Wind tunnel testing equipment

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.